PRODUCTS
 
Inverter I-7563 | I-7520A | I -7188E2D  
Model: I-7520/I-7520A
I-7520/I-7520A
Large Size
 
Model: I-7520R/I-7520AR
I-7520R/I-7520AR
Large Size

RS485/RS232 Converter I-7520A
I-7520/I-7520A
I-7520R/I-7520ARRoHS
I-7520: Isolated RS-232 to RS-485 Converter
I-7520A: Isolated RS-232 to RS-422/485 Converter
I-7520R: RS-232 to Isolated RS-485 Converter
I-7520AR: RS-232 to Isolated RS-422/485 Converter

 

Introduction
Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardware or software. The I-7520/I-7520A lets you easily build an industrial grade, long-distance communication system using standard PC hardware.

The design of the isolation between the I-7520 and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to the I-7000 bus converter manual for detailed information.

 

Feature
.Auto Switching Baud Rate, 300~115200 bps
.3000 VDC Isolation Protection on the RS-485 side
.Transmission Speed of up to 115200 bps
.ESD Protection for the RS-232/422/485 Data Line
.Power Input of +10 ~ +30 VDC
.Supports Operating Temperatures from -25 °C ~ +75 °C
.DIN-Rail

 

Specifications

Models I-7520 I-7520R I-7520A I-7520AR
Interface
Serial Interface RS-232 TxD, RxD, GND
RS-422 - TxD+, TxD-, RxD+, RxD
The RS-422 and RS-485 cannot be used simultaneously
RS-485 Data+, Data-
2-wire Cabling/4-wire Cabling Belden 8941 (2P twisted-pair cable)/Belden 8942 (4P twisted-pair cable), if different cables are used, the transmission distance may change
Transfer Distance Max. 1,200 m for at speed 9.6 kbps; Max. 400 m at 115.2 kbps
Max. Devices Supported 256 (Without repeater)
Self-Tuner Asic Inside Yes
Speed 300 ~ 115200 bps
ESD Protection Yes
3000 VDCIsolated Voltage On RS-232 side On RS-485 side On RS-232 side On RS-485 side
Connection RS-232 9-Pin Female D-Sub
RS-422/485 Removable 10-Pin Terminal Block
LED Indicators
Power/Communication Yes
Power
Input Voltage Range +10 VDC ~ +30 VDC (Non-isolated)
Power Consumption 1.2 W
Mechanical
Casing Plastic
Flammability Fire Retardant Materials (UL94-V0 Level)
Dimensions (W x H x D) 72 mm x 118 mm x 35 mm
Installation DIN-Rail
Environment
Operating Temperature -25 °C ~ +75 °C
Storage Temperature -30 °C ~ +75 °C
Humidity 10 ~ 90% RH, non-condensing