INC TECHNOLOGY CO.,LTD.
 
                                                                                             Products page

MICROPROCESS PANEL CONTROLLER METER (24x48mm)
Model:MMX-AS



►Accuracy 0.05% F.S. ±1 digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter
   /Pt-100/Load Cell/Resistor/etc.......
►Programmable rate -19999~99999 digit
►Auto zero/hold/ROOT function
►Max. two alarm function (optional)
►16 bit DAC analog output function (optional)
►Digit RS-485 interface function (optional)

MICROPROCESS PANEL CONTROLLER METER (DISPLAY 0.56")
Model:MM2



►Accuracy 0.1% F.S.  ± 1digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter
   /Pt-100/Load Cell/Resistor/ect............
►Programmable rate 0 to 19999 digit
►Auto zero and hold function
►Max. four alarm function (optional)
►15 bit DAC analog output function (optional)
►Digit RS-485 interface function (optional)

MICROPROCESS PANEL CONTROLLER METER
Model:MM2S



►Accuracy 0.1% F.S. ± 1digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter
   /Pt-100/Load Cell/Resistor/ect............
►Programmable rate 0 to 19999 digit
►Simulation pushwheel digit switches, easy to operate
►Auto zero and hold function
►Max. four alarm function (optional)
►15 bit DAC analog output function (optional)
►Digit RS-485 interface function (optional)

MICROPROCESS PANEL CONTROLLER METER (DISPLY 0.8")
Model:MMX-A



►Accuracy 0.1% F.S. ± 1digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter
   /Pt-100/Load Cell/Resistor/ect............
►Programmable rate -19999 ~99999 digit
►Auto zero and hold function
►Max. four alarm function (optional)
►15 bit DAC analog output function (optional)
►Digit RS-485 interface function (optional)

MICROPROCESS PANEL CONTROLLER METER (PUSHWHEEL TYPE)
Model:MMX-AP



►Accuracy 0.1% F.S. ± 1digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitte
   /Pt-100/Load Cell/Resistor/ect............
►Programmable rate -19999 to 99999 digit
►Auto zero and hold function
►Pushwheel digit switches setting easy to operate
►Dimension small and High stability

MICROPROCESS DUAL PANEL CONTROLLER METER
Model:MM2D



►Accuracy 0.1% F.S. ±1digit
►Dual input measuring and display DCA/DCV/ACA/ACV
►Programmable rate 0 to 19999 digit
►Two alarm function (Optional)
►15 bit DAC analog output function (optional)
►Digit RS-485 interface function (optional)

MICROPROCESS RPM & LINE-SPEED CONTROLLER METER
Model:MMR



►Accuracy 0.03% F.S.
►Measuring Pulse(TTL,CMOS), Magnetic pick-up signal
►Accept input rates up to 50 KHz
►Display type of RPM or line-speed can be modified
►Input pulse of revolution can be modified (1-99999 pulse / revolution)
►Two alarm function (Optional)
►Multiplier bank analog output function
►15 bit DAC analog output function (Optional)
►Digit RS-485 interface function (Optional)

MICROPROCESS RS-485 DISPLAY METER (24*48mm/48*96mm)
Model:MMX-RS



►5 digit RS-485 display meter
►Readout range form -19999 to 99999 digit
►Modbus RTU mode for RS-485 protocal
►Wide input range for auxiliary power
►Dimension small and High stability

MICROPROCESS AC CURRENT MONITOR METER,48*96mm
Model:MCM



►Accuracy 0.25% F.S. ± 1digit
►Input measurement network can be selective (1 Ф 2W,3 Ф 3W)
►CT rate can be modified (1 to 2000)
►Over and under current monitoring can be modified
►Anomalism current and anomalism time(max,9 times)can be recode
►Output relay reset type can be modified
►Dimension small and High stability

MICROPROCESS PANEL MONITOR METER,48*96mm
Model:MCM-1



►Accuracy 0.1% F.S. ± 1digit
►Measuring DCA/DCV/ACA/ACV/Potentiometer/Transmitter
   /Pt-100/Load Cell/Resistor/ect............
►Programmable rate -1999~9999 digit
►Anomalism current and anomalism time(max,9 times)can be recode
►Over/under/over and under/band monitoring can be modified
►Output relay reset type can be modified
►Dimension small and High stability


Products page